Quart Accessori
QUART NKK
The QUART NKK Pocket Size Low Contrast Wedge is compact and small insize. However, it is sufficient for all QA requirements.It contributes to a precise identification of visual perceptibility limits by providing the specific infomation if the wedge structure is still visible against the noise in the image. In addition, the wedge provides the possibility to relate perceptibility levels to specific image receiver doses or rates.
The positioning is straightforward as the
tool is directly placed on the phantom surface using 25mm Al
added filtration. The wedge features:
_ 3 Low Contrast holes Ø 2.0 mm
_ Wedge Length: 4.0 cm
_ Wedge Size: 0.4 mm (at 0) to 4.0 mm (at 4 cm)
Delivery includes
-QUART
NKK Low Contrast Perceptibility Test Tool
-Manual
QUART ZTB
The QUART ZTB Pocket Size Tube Alignment Test Tool is very easy to use due to simple positioning options: Centre Marker of a CR/DR/Fluoro phantom/Centre Marker of a dental test phantom / Centre of an X-Ray Field. The tool has a 2-ring structure for checks on alignment accuracy. 4 pre-defined positions correlate with quantities of misalignment between 0 – 6°. The QUART ZTB has an overall length of only 17 mm.
Delivery includes
-QUART ZTB
Alignment Tool
-Manual
QUART
KAT
The QUART KAT 30 x 24 and 43 x 45
are both used to
check the film contact
at conventional radiography equipment
with film/screen technology.
Flaws would be revealed by variations
in density on the developed film.
Delivery includes
-QUART KAT
Film Contact Test Tool
-Manual
QUART LT
The QUART LT
Filter Stand is designed to hold added
filtration in place where
positioning is critical, or where a special test setup needs
to be realised.
The stand can be placed directly on a
R+F phantom, or it can be used to position the filter
beneath the patient table at a C-Arm unit.
Delivery includes
-
QUART LT Filter Stand
-
Manual
- Soft Bag
QUART Helping Hands
The
QUART
Helping Hand
Suction Mounts
can be used for a variety of tasks.
They are able to hold small and light
items in place, i.e. filters or dosemeter detectors.
They are also able to provide vertical hold and support for flat objects between 4 – 20 millimetres weighing up to 2 kg‘s (e.g. the
QUART SP_dl phantom).The excellent mounting characteristics result from the holders‘ very strong suction cups. Both holders are laid out for 1 object height per side (4 heights per holder).
Delivery includes
- QUART Helping Hands Holders; Set of 2
Added Filtration
QUART
al250
Standard Compliant Added Filtration
for R+F. 25 mm Aluminium. 99.5 % purity.
The filter features an adaptor for
varying light visor sizes.
Standard Compliant Added Filtration for R+F. 10 mm Copper.
The filter is used for QA/QC routines with exposure parameters >100 kV.
Posizionatore Universale per OPT (OPG) dei fantocci Dent/digiTest.
Esisitono posizionatori specifici per modelli di apparecchi OPT. contattare info@active radsys.it per verificare la disponibilità
Torna alla pagina principale