Multimetro  Dosimetro Quart Dido: Dosi, DWP , Rateo dose, impulsi e tempo e kV.
Leggi tutto....
Fantoccio Cbct_ap per i controlli sui Cbct, DVT, 3d  
Leggi tutto....

Fantoccio Quart Mam/Digi per i controlli di qualità in mammografia digitale e tomosintesi.
Leggi tutto...

DidoSvm piccola Il survey Meter di ultima generazione con  rivelatore allo stato solido e delle prestazioni straordinari.
Leggi tutto...
 PGT950 è il più avanzato  Dosimetro,  identificatore di isotopi e spettrometro 
Leggi tutto...
 QUART Nonius Lo strumento di misura per determinare il limite del campo di emissioni Rx  in Radiologia + Tac  
 Leggi tutto...
Sistema   ottico di sorveglianza   dello spazio Per-Mon: Rivelamento e Protezione delle persone nelle aree ad irraggiamento Leggi tutto tutto.. Survey Meter OD–01 camera ionizzazione, misura della dose dai 6 KeV fino  ai 15 MeV e i beta 60 keV ai 2 MeV.
Leggi tutto...
   

 

I più letti

Quart Accessori

QUART dispone di diversi accessori per completare i controlli di qualità sui gli apparecchi radiologici ecco alcuni :

QUART NKK

The QUART NKK Pocket Size Low Contrast Wedge is compact and small insize. However, it is sufficient for all QA requirements.It contributes to a precise identification of visual perceptibility limits by providing the specific infomation if the wedge structure is still visible against the noise in the image. In addition, the wedge provides the possibility to relate perceptibility levels to specific image receiver doses or rates.

The positioning is straightforward as the tool is directly placed on the phantom surface using 25mm Al added filtration. The wedge features:
_ 3 Low Contrast holes Ø 2.0 mm
_ Wedge Length: 4.0 cm
_ Wedge Size: 0.4 mm (at 0) to 4.0 mm (at 4 cm)

Delivery includes
 -QUART NKK Low Contrast Perceptibility Test Tool
 -Manual

 

QUART ZTB

The QUART ZTB Pocket Size Tube Alignment Test Tool is very easy to use due to simple positioning options: Centre Marker of a CR/DR/Fluoro phantom/Centre Marker of a dental test phantom / Centre of an X-Ray Field. The tool has a 2-ring structure for checks on alignment accuracy. 4 pre-defined positions correlate with quantities of misalignment between 0 – 6°. The QUART ZTB has an overall length of only 17 mm.

Delivery includes
-QUART ZTB Alignment Tool
-Manual

QuartZTB1

RAD Step Wedge
Art. No. 12206

21-step aluminium wedge for tests of dose reproducibility and sensitometric properties of radiogra-

phic screen-film systems. Features numbers to mark each step.

SIZE       231 x 110 x 31.5 mm

STEPS     21, 1.5 mm graduation per step

 

 QuartRadSteps

QUART AEC RAD Test Set
Art. No. 13230

The AEC RAD test set consists of 12 PMMA plates of varying thicknesses. The set is used to test

the automatic exposure control features of radiography equipment according IEC 61223-3-1.

Additional sheets to add to the set are available on request.

SIZE       240 x 240 mm

THICKNESS         9x 20mm / 1x 10mm / 2x 5mm

 

QuartAec

Filter Adaptor
 Art. No. 13240

Adaptor to use QUART al250 for collimator rails with distances between 98 mm - 174 mm, e.g. as

used for mobile C-arm x-ray equipment.

RAIL DISTANCES              98 mm to 174 mm

QuartFilAdappng

QUART KAT

The QUART KAT 30 x 24 and 43 x 45 are both used to check the film contact
at conventional radiography equipment with film/screen technology.
Flaws would be revealed by variations in density on the developed film.

Delivery includes
-QUART KAT Film Contact Test Tool
-Manual

 

QUART LT

The QUART LT Filter Stand is designed to hold added filtration in place where positioning is critical, or where a special test setup needs to be realised.
The stand can be placed directly on a R+F phantom, or it can be used to position the filter beneath the patient table at a C-Arm unit.

Delivery includes
 - QUART LT Filter Stand
 - Manual
 - Soft Bag

 

QUART Helping Hands

The QUART Helping Hand Suction Mounts can be used for a variety of tasks.
They are able to hold small and light items in place, i.e. filters or dosemeter detectors.

They are also able to provide vertical hold and support for flat objects between 4 – 20 millimetres weighing up to 2 kg‘s (e.g. the QUART SP_dl phantom).

The excellent mounting characteristics result from the holders‘ very strong suction cups.  Both holders are laid out for 1 object height per side (4 heights per holder).

Delivery includes
 - QUART Helping Hands Holders; Set of 2

Added Filtration

QUART al250
Standard Compliant Added Filtration for R+F. 25 mm Aluminium. 99.5 % purity.
The filter features an adaptor for varying light visor sizes.

 

 

 

 

QUART cu10
Standard Compliant Added Filtration for R+F. 10 mm Copper.
The filter is used for QA/QC routines with exposure parameters >100 kV.

 

Quart Dent/Digi H
Posizionatore Universale per Cefalo dei fantocci Dent/digiTest.
Esisitono posizionatori specifici per modelli di apparecchi  OPT. contattare info@active radsys.it per verificare la disponibilità

 

   

Accedi

Registrati