Multimetro  Dosimetro Quart Dido: Dosi, DWP , Rateo dose, impulsi e tempo e kV.
Leggi tutto....
Fantoccio Cbct_ap per i controlli sui Cbct, DVT, 3d  
Leggi tutto....

Fantoccio Quart Mam/Digi per i controlli di qualità in mammografia digitale e tomosintesi.
Leggi tutto...

DidoSvm piccola Il survey Meter di ultima generazione con  rivelatore allo stato solido e delle prestazioni straordinari.
Leggi tutto...
 PGT950 è il più avanzato  Dosimetro,  identificatore di isotopi e spettrometro 
Leggi tutto...
 QUART Nonius Lo strumento di misura per determinare il limite del campo di emissioni Rx  in Radiologia + Tac  
 Leggi tutto...
Sistema   ottico di sorveglianza   dello spazio Per-Mon: Rivelamento e Protezione delle persone nelle aree ad irraggiamento Leggi tutto tutto.. Survey Meter OD–01 camera ionizzazione, misura della dose dai 6 KeV fino  ai 15 MeV e i beta 60 keV ai 2 MeV.
Leggi tutto...
   

 

I più letti

 ICW Ionization Cambre Arrays

 

 


ICWSys

As an alternative solution to conventional ionization chambers in traversing measuring systems we offer multi cell ionization chambers with cell sizes of 5 -15 mm. In combination with a line source these chambers not only provide a 100% coverage of the cross profile, but in addition allow the detection of local faults and the measurement of differences in the coating processes at the same time.

a12c45529a

 

Measuring principle, Instantaneous Cross Web Method (ICW):

 The ICW method is a specific kind of radiometric measurement. A line radiator is used as radiation source. 

The detector is an ionisation chamber array and divided into several measuring zones. 

The measuring information is available for every measuring zone immediately and for alle measuring zones simultaneously.
The cross profil of the basis weight distribution is continuously recorded with the ICW method

Differentiation Measurement - 1 Measuring Point

For every measuring zone the current total basis weight in the measuring gap will be recorded.

With suitable coating geometry - like edge strips without mass - it is possible to determine the basis weight of the base material from the according measuring zones. In the other measuring zones the total basis weight of base material and coating is measured. From the difference the basis weight of the coating is determined.

By using further measuring points it is possible to measure multible coatings.

ICWSysTep

 

Caratteristiche Tecniche                    
       

 

 

 

 

Accedi

Registrati