Multimetro  Dosimetro Quart Dido: Dosi, DWP , Rateo dose, impulsi e tempo e kV.
Leggi tutto....
Fantoccio Cbct_ap per i controlli sui Cbct, DVT, 3d  
Leggi tutto....

Fantoccio Quart Mam/Digi per i controlli di qualità in mammografia digitale e tomosintesi.
Leggi tutto...

DidoSvm piccola Il survey Meter di ultima generazione con  rivelatore allo stato solido e delle prestazioni straordinari.
Leggi tutto...
 PGT950 è il più avanzato  Dosimetro,  identificatore di isotopi e spettrometro 
Leggi tutto...
 QUART Nonius Lo strumento di misura per determinare il limite del campo di emissioni Rx  in Radiologia + Tac  
 Leggi tutto...
Sistema   ottico di sorveglianza   dello spazio Per-Mon: Rivelamento e Protezione delle persone nelle aree ad irraggiamento Leggi tutto tutto.. Survey Meter OD–01 camera ionizzazione, misura della dose dai 6 KeV fino  ai 15 MeV e i beta 60 keV ai 2 MeV.
Leggi tutto...
   

 

I più letti
 

BNC

MCA 8000

 


Rivelatori e Spettrometria nucleari

Product Summary

The System 8000 is a complete spectrometer in a single integrated package. This instrument includes the detector bias supply, a high performance analog pulse processor, 8000- or 16,000-channel MCA, and an Ethernet interface. Just connect the detector to the System 8000, and then connect the System 8000 to the PC or network.
The MCA8000 features an 8.12 microsecond successive approximation ADC.

With hardware add-one to memory and an on-board 20 MHz processor. Differential non-linearity is less than ±1% over the top 99% of the range, and integral non-linearity is less than 0.05% over the same range.  Digital stabilizers are provided for both the gain and offset.  Data is stored as 31 bits per channel with an additional 8 bits for ROI information.  Flexible live time correction is provided with a choice of simple busy, Lowes, Gedcke-Hale, or external dead time methods.
 
 

MCA 8000 Radiation Detector

 
   

 The MCA8000 is fully computer controlled.  There are no pots to adjust.  Upper level (ULD) and lower level (LLD) discriminators and the ADC zero offset are all computer controlled.  Conversion gain can be set from 250 channels to the maximum for the particular model (16,000 channels for the MCA8016).  Group size can also be adjusted from 250 channels to the maximum.  A wide range of presets is available, including live time, real time, selectable ROI integral, peak height, external event, and statistical uncertainty.

 

The MCA8000 has all of the I/O connections for configuring any measurement application.  External rear panel BNC connections are provided for GATE, REJECT, BUSY IN and COUNT RATE IN.  The polarity of REJECT and BUSY IN can be programmed from the MCA software.  MCA outputs include SCA OUT, PEAK DETECT, and ADC BUSY.  The polarity of the PEAK DETECT and ADC BUSY signals can also be programmed from the software.  A 15-pin DSUB connector is provided for digital control signals.  This connector has three output and two input lines as well as an interrupt line, power and ground.  Several preprogrammed scenarios are available as well as direct control from the s
The MCA8000 includes QuantumMCA software for qualitative analysis at no additional charge. In addition, QuantumMCA will control the MCA8000 hardware. For gamma applications that require quantitative analysis of spectra, see QuantumGold.

Available Configurations:

MCA8008:   8000 channels
MCA8016:  16,000 channels

Accessories

  • QuantumGold software for quantitative analysis
  • High-purity germanium detectors
  • Selection of cables

 

 

 

 

Dettagli e Caratteristiche Tecniche del PGT MCA8000 (172 kb)

 

 

Accedi

Registrati