Multimetro  Dosimetro Quart Dido: Dosi, DWP , Rateo dose, impulsi e tempo e kV.
Leggi tutto....
Fantoccio Cbct_ap per i controlli sui Cbct, DVT, 3d  
Leggi tutto....

Fantoccio Quart Mam/Digi per i controlli di qualità in mammografia digitale e tomosintesi.
Leggi tutto...

DidoSvm piccola Il survey Meter di ultima generazione con  rivelatore allo stato solido e delle prestazioni straordinari.
Leggi tutto...
 PGT950 è il più avanzato  Dosimetro,  identificatore di isotopi e spettrometro 
Leggi tutto...
 QUART Nonius Lo strumento di misura per determinare il limite del campo di emissioni Rx  in Radiologia + Tac  
 Leggi tutto...
Sistema   ottico di sorveglianza   dello spazio Per-Mon: Rivelamento e Protezione delle persone nelle aree ad irraggiamento Leggi tutto tutto.. Survey Meter OD–01 camera ionizzazione, misura della dose dai 6 KeV fino  ai 15 MeV e i beta 60 keV ai 2 MeV.
Leggi tutto...
   

 

I più letti

 

RMS LSI SCAN

MONITOR DI CONTAMINAZIONE PER BUCATO E PICCOLI OGGETTI CON NASTRO TRASPORTATORE

 


 RMS LSI Scan Medio

Short description
- Conveyor belt system with chain-link belt (stainless steel), with frequency-regulated motor for setting the belt speed from 50cm/min - 600cm/min.
- Operate and service using the 10.4-inch colour touch display.
- Alternatively, automatic speed setting as function of the set alarm limit (detection limit).
- Automatic background effect measurement with material recognition, continual background effect subtraction.
- Detector unit comprises upper and lower detector configuration. The detector units are assembled on one side at the conveyor belt system mechanics to create improved access on the operator side.
The lower detector configuration is located beneath the chain-link belt; the upper detector configuration can be adjusted from 20 mm to 350 mm. Good access to the detectors for maintenance or repair purposes has been realised here. Access to the lower detectors is provided by a remo vable unit.

Upper and lower detector housing is equipped with 5 detectors SZ345 each
- The operating housing on the swivel arm provides the embedded HMI The electronics comprise:
- Linux Embedded System with 10.4-inch colour touch display for displaying measured values,  arametrisation and all service tasks.
- I/O module with floating contacts
- USB and LAN
- Software with measured value display including detector ID, measured value and parametrisati on of all parameters, limit values, belt speed, min./max. warning thresholds, including detector display for function inspection, detector-specific pulse rate, measured value display in cps or alternatively as Bq or Bq/cm² as a bar chart. Measured objects (e.g. overall, shoes, helmets ...) can be defined in the software with limit parameters, such as clearance to the upper detectors, belt speed, alarm limits... When the measured object is selected, all settings are performed auto matically.
- 5x Emergency Off switch and the following further safety devices:
- Height inspection of the measured object, automatic conveyor belt stop
- Anti-trap protection for the mobile upper detector unit

 

 

Caratteristiche Tecniche                    
       

 

 

 

Contaminazione

Accedi

Registrati