Multimetro  Dosimetro Quart Dido: Dosi, DWP , Rateo dose, impulsi e tempo e kV.
Leggi tutto....
Fantoccio Cbct_ap per i controlli sui Cbct, DVT, 3d  
Leggi tutto....

Fantoccio Quart Mam/Digi per i controlli di qualità in mammografia digitale e tomosintesi.
Leggi tutto...

DidoSvm piccola Il survey Meter di ultima generazione con  rivelatore allo stato solido e delle prestazioni straordinari.
Leggi tutto...
 PGT950 è il più avanzato  Dosimetro,  identificatore di isotopi e spettrometro 
Leggi tutto...
 QUART Nonius Lo strumento di misura per determinare il limite del campo di emissioni Rx  in Radiologia + Tac  
 Leggi tutto...
Sistema   ottico di sorveglianza   dello spazio Per-Mon: Rivelamento e Protezione delle persone nelle aree ad irraggiamento Leggi tutto tutto.. Survey Meter OD–01 camera ionizzazione, misura della dose dai 6 KeV fino  ai 15 MeV e i beta 60 keV ai 2 MeV.
Leggi tutto...
   

 

I più letti

Automatic Exposure Control (AEC) Sensor - Ionization Chambers for X-Ray Exposure Control


Application

b2600b438f
 

The Ionisation Chambers are used as  sensor elements for automatic X-ray exposure control units. They comprise air-filled parallel chambers with 1, 3 or 5 measuring fields, coupled with an amplifier and a field selector. The low overall thickness of 6 mm ensures the chamber may be used with all modern X-ray equipment. 

 


 

 
 
 
 
 

 

Principle of Operation

The current generated in the sensor fields by the X-rays will be amplified, digitized and fed to the automatic exposure controller. The AEC supplies the cut-off signal to the generator, and thereby ensures an optimal and reproducible image quality, independent of the radiation quality, object density, and other factors.

 

Types of chambers

 

The listed sizes of AEC chambers are supplied as a standard, but other dimensions are available on request. The minimized chamber electronics is mounted directly on the chamber side. If necessary there are versions with electronics separated up to 90 cm distance from the ionization chamber.

 

 

 

Specifications


 

 

 

 

Chamber Electronics

The ionization chambers are supplied with a minimized chamber electronics, that amplify, digitize and process the generated current according to the field selection.

The electronics also generate the chamber voltage without the need for an external high-voltage source.

 

 

Ramp Module

In order to assure the backward compatibility with conventional interfaces a separate ramp module converts the pulses into a voltage ramp. This ramp module should be placed between interface cable and AEC interface on the generator site.  

 
 

 

 

 
 

Accedi

Registrati