Multimetro  Dosimetro Quart Dido: Dosi, DWP , Rateo dose, impulsi e tempo e kV.
Leggi tutto....
Fantoccio Cbct_ap per i controlli sui Cbct, DVT, 3d  
Leggi tutto....

Fantoccio Quart Mam/Digi per i controlli di qualità in mammografia digitale e tomosintesi.
Leggi tutto...

DidoSvm piccola Il survey Meter di ultima generazione con  rivelatore allo stato solido e delle prestazioni straordinari.
Leggi tutto...
 PGT950 è il più avanzato  Dosimetro,  identificatore di isotopi e spettrometro 
Leggi tutto...
 QUART Nonius Lo strumento di misura per determinare il limite del campo di emissioni Rx  in Radiologia + Tac  
 Leggi tutto...
Sistema   ottico di sorveglianza   dello spazio Per-Mon: Rivelamento e Protezione delle persone nelle aree ad irraggiamento Leggi tutto tutto.. Survey Meter OD–01 camera ionizzazione, misura della dose dai 6 KeV fino  ai 15 MeV e i beta 60 keV ai 2 MeV.
Leggi tutto...
   

 

I più letti

VacuDAP OEM

64e4177a3d

The Dose Area Product measuring chamber comprises the complete electronic module and provides a serial interface RS485. By means of an ASCII protocol the handling and display of measuring results is managed by the X-ray unit control console or by a separate display unit. An interface cable with converter RS232-RS485 is available to connect the chamber to the standard interface of a host computer.

 

  

VacuDAP standard

c16a77f3e1

The single-line Display unit is added to the measuring chamber to provide the complete system VacuDAP standard. The display unit enables to change settings and parameters to adjust the measuring chamber to the measuring conditions. A printer can be connected at the serial interface (RS232) at the Display unit. Also data transfer into a RIS System can be realised by this interface.

 

 

 

 

VacuDAP fluoro

fd38b5cd8a

Dose Area Product meters used for fluoroscopic X-ray units can be equipped with a double-line display that indicates dose area product and dose area product rate simultaneously. Further functionality corresponds to display standard.

 
 

VacuDAP twin

7cfa8f1951

The two-channel measuring system VacuDAP twin can be used for radiographic units with two X-ray tubes. Both measured values are indicated independently. Further functionality corresponds to display standard.

 

 

 

 

VacuDAP Bluetooth®

e6e62f7020

VacuDAP Bluetooth® allows to install the Dose Area Product meter VacuDAP at the X-ray machine without interface cable by using Bluetooth® wireless technology. It saves expense for cable installation between DAP meter and operating desk but assures complete functionality of the standard VacuDAP. The Bluetooth® option is available with a small measuring chamber, of course.

 

 

 

VacuDAP duo

fab2ab79ce

The system VacuDAP duo allows to determine Dose Area Product, Dose Area Product Rate, Air Kerma, Air Kerma Rate and irradiation time. So the system fully complies with international regulations for radiography and fluoroscopy systems (IEC 60601-2-54, IEC 60601-2-43, 21 CFR 1020.32, IEC 60580).

 

 

 


For detailed information please click ourpdf icon PDF.

pdf icon Carateristiche e paragone delle DAP

 
     

Accedi

Registrati